IPS e.max Ceram Incisal 20 g BL

The automatic temperature checking set ?€?ATK2?€? is used to check and adjust the firing temperatures in furnaces with automatic calibration programs for the ATK2 system (e.g. Programat P500, P510, P700, P710, EP3000, EP3010, EP5000, EP5010). The simultaneous double-range calibration is a special feature of the ATK2.

This material is used to achieve what is known as the "halo effect", which is caused in natural teeth by the light refraction at the incisal edge.

IPS e.max Ceram Intensive Gingiva

A total of 12 Gingiva ceramic materials for a life-like gingiva, particularly for the fabrication of implant retained restorations.

Five life-like gingival materials are used in combination with these 4 Intensive Gingiva powders and 3 Essence powders, depending on the desires of the patient.

An IPS e.max Ceram ZirLiner Gingiva is available for use in conjunction with zirconium oxide.

The Occlusal Dentin materials are available in two different shades. They are used as the shade basis for the occlusal surface and to intensify the chroma.

The Opal Effect materials are available in six shade gradations.

Starting with Opal Effect 1, with naturally enhanced opalescence and simultaneous high translucency, the brightness value between Opal Effect 2 and Opal Effect 4 is continuously increased.??

Opal Effect 5 then demonstrates the typical opal shade. The Opal Effect violet material is used to reduce the brightness value in the incisal area.

The five IPS e.max Ceram Shades in A-D and Chromascop shades are used for final shade modifications of IPS e.max restorations, as well as for the wash firing of IPS e.max glass ceramics.

The two IPS e.max Ceram Shades Incisal materials are especially suitable for fully anatomical restorations (e.g. IPS e.max ZirPress).

They are used to imitate the incisal area and they provide the incisal third with optical translucency and an in depth effect.

The IPS e.max Ceram Shade Guides demonstrate the translucency of the individual materials and are fired from the original ceramic materials.

The IPS e.max Ceram Shade Guides demonstrate the translucency of the individual materials and are fired from the original ceramic materials.

IPS e.max Ceram is recommended for use with IPS e.max materials to achieve the highest level of shading and characterization.

The Transparent materials are available in three shade graduations.

They are used to accurately reproduce transparent areas in full detail, particularly in the incisal third.

Depending on patient requirements, the Transparent materials may be used alone or mixed with other materials.

Ivoclar IPS e.max Press Ingots are high-quality lithium disilicate glass-ceramic ingots designed for the press technique. They are used to fabricate esthetic, durable restorations with excellent strength and translucency, making them ideal for both anterior and posterior cases.

Key Features:

• Material: Lithium disilicate glass-ceramic for high strength and esthetics

• Indications: Suitable for veneers, inlays, onlays, crowns, and implant-supported restorations

• Shades/Levels: Available in different translucency levels for customized results

• Processing: Designed for use with the press technique in compatible press furnaces

The IPS e.max Press Invex liquid is used to soften the surface reaction layer formed on pressed IPS e.max Press and ZirPress objects during the pressing procedure.

Ivoclar IPS e.max Press Ingots are high-quality lithium disilicate glass-ceramic ingots designed for the press technique. They are used to fabricate esthetic, durable restorations with excellent strength and translucency, making them ideal for both anterior and posterior cases.

Key Features:

• Material: Lithium disilicate glass-ceramic for high strength and esthetics

• Indications: Suitable for veneers, inlays, onlays, crowns, and implant-supported restorations

• Shades/Levels: Available in different translucency levels for customized results

• Processing: Designed for use with the press technique in compatible press furnaces

Shade tabs showing the range of ingots available in IPS e.max Press HO and MO.

Shade tabs showing the range of ingots available in IPS e.max Press LT.

IPS EMAX PRESS/CAD MT SHADE GUIDE

IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar?? zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality

IPS Ivocolor Glaze Paste

IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality

IPS Ivocolor Glaze Powder

IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality

IPS Ivocolor Shade Dentin

IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality