Glue - Fast Setting (1 Oz)

Zapit Accelerator, refill (16 oz)

Argen NP Bond is a non-precious bonding alloy designed to provide strong adhesion between metal frameworks and porcelain. It delivers reliable performance in crown, bridge, and implant cases, ensuring consistent results in restorative dental procedures.

Key Features:

• Color: White

• Alloy Type 4, Predominantly Base (PB) according to ADA classification

• Suitable for crowns, bridges, and implant frameworks

• Provides strong, durable bonding between metal and porcelain

• 5 oz quantity for multiple restorations
  

Composition:

• Nickel (Ni): 77.0%

• Chromium (Cr): 14.0%

• Aluminum (Al): 2.0%

• Titanium (Ti): 0.25%

• Cobalt (Co): 0.25%

• Molybdenum (Mo): 4.7%

• Beryllium (Be): 1.8%

Physical Properties:

• Vickers Hardness (After Firing): 370

• Proof Stress Soft: 630 MPa

• Tensile Strength Soft: 937 MPa

• Elongation Soft: 10%

• Elastic Modulus: 207 GPa

Processing:

• Investment: Phosphate bonded

• Crucible: Quartz or Zircon

• Degassing Temp: 650–1040°C

• Oxidation Procedure: Hold 0 min with vacuum; do not remove oxide

Solder & Laser Wires:

• PreSolder: P, NP, Flux-N-SOL

• PostSolder: LO, R

• Laser Wire: LWNP/NI

Thermal Properties:

• Melting Range: 1160–1280°C

• Casting Temp: 1370°C

• Density: 7.8 g/cc

• Expansion at 500°C: 14.5

• Expansion at 600°C: 14.7

• Burnout Temp: 870°C

Adhesive pickup liquid designed to provide a secure, temporary hold for crowns, inlays, onlays, and other small dental components during placement or trial fitting. Easily applied and residue-free upon removal.

• Used for temporarily holding restorations during placement

• Provides reliable grip without permanent bonding

• Leaves no residue on restoration or prep

• Supplied in a 6 cc bottle

4-ounce bottle of DIE EEZ, a high-performance die lubricant formulated to provide a smooth, non-stick surface for precise dental restorations. Ideal for preventing wax and other materials from adhering to dies during the modeling process.

Features:

• Size: 4 oz

• Function: Lubricates die surfaces to prevent sticking

• Application: Suitable for all die materials

• Consistency: Easy-to-apply liquid for even coverage

Ceraresin Bond is a bonding system specifically designed for the repair of ceramic, porcelain, acrylic, and C&B materials.

• Bonds all ceramic, porcelain, acrylic, resin composite, and C&B materials
• Fast and easy procedures provide a durable bond
• Works on both intra-oral and extra-oral procedures
• Extremely resistant to moisture and thermal strains

With this simple to use system, both dentists and laboratory professionals can securely and reliably bond various materials including light-cured laboratory composites such as Ceramage extra-orally, or even light-cured resin composites such as BEAUTIFIL Flow Plus for veneering or repair intra-orally.  The material is extremely resistant to moisture and thermal strains providing a long lasting, durable bond.

PN 1741 • Ceraresin Bond
6 mL of Bond 1, 5 mL of Bond 2, 50 micro brushes, and 5 disposable V-dish 0.1 mL unit doses

Related Product
PN 1740 • M.L. PRIMER (for alloys) 5 mL

Featured in BEST PEARLS of 2013 in Dental Economics

Ceraresin Bond Porcelain & Resin Repair System from Shofu Dental
Picture this: your assistant seats a patient who immediately points to an anterior crown that has a piece of porcelain broken off the incisal corner. In my experience, I have not had a lot of long-term success in repairing the porcelain. At that point, I remake the crown, usually at my expense. I have recently tried Ceraresin Bond in these circumstances with excellent adhesion and no loss of the repaired restoration.

Zapit Accelerator Application Pens (Pkg. of 4)

Zapit Base (9.4g)

Zapit Accelerator with spray pump (2 oz) (60 ml)