IPS e.max Ceram Dentin A-D shades can be used to replicate life-like dentin material in IPS e.max restorations.

The 22 Essence powders are used for internal characterizations, to mix with other IPS e.max Ceram powders, and for final superficial, external characterizations. The very fine powders demonstrate different degrees of fluorescence, depending on the individual shade.

A total of 12 Gingiva ceramic materials for a life-like gingiva, particularly for the fabrication of implant retained restorations.

These five life-like materials are used in combination with the 4 Intensive Gingiva and 3 Essence powders, depending on the desires of the patient.

An IPS e.max Ceram ZirLiner Gingiva is available for use in conjunction with zirconium oxide.

With the allround liquid, a consistency suitable for conventional processing and drying is achieved. Powders mixed with the allround liquid demonstrate a shorter processing time (approximately 1/2 day). The longlife liquid, however, enables a slightly pasty consistency and the powders mixed with this liquid can be processed over a longer period of time (approximately 1 week).

IPS e.max Ceram Glaze is applied to all areas of the restoration that have been veneered using IPS e.max Ceram.

The fluorescent glazing materials are used in those areas of the restoration which have not been veneered with IPS e.max Ceram and are applied to framework materials that demonstrate no or very low fluorescence, and for which fully or partially anatomical reduction has been carried out.

IPS e.max Ceram Glaze is applied to all areas of the restoration that have been veneered using IPS e.max Ceram.

The fluorescent glazing materials are used in those areas of the restoration which have not been veneered with IPS e.max Ceram and are applied to framework materials that demonstrate no or very low fluorescence, and for which fully or partially anatomical reduction has been carried out.

IPS e.max Ceram Incisal and Transparent Incisal demonstrate slight fluorescence and opalescence similar to natural enamel. The high stability and excellent modeling properties enable quick and accurately detailed layering of true to nature incisal edges and occlusal surfaces.

IPS e.max Ceram Incisal 20 g BL

The automatic temperature checking set ?€?ATK2?€? is used to check and adjust the firing temperatures in furnaces with automatic calibration programs for the ATK2 system (e.g. Programat P500, P510, P700, P710, EP3000, EP3010, EP5000, EP5010). The simultaneous double-range calibration is a special feature of the ATK2.

This material is used to achieve what is known as the "halo effect", which is caused in natural teeth by the light refraction at the incisal edge.

IPS e.max Ceram Intensive Gingiva

A total of 12 Gingiva ceramic materials for a life-like gingiva, particularly for the fabrication of implant retained restorations.

Five life-like gingival materials are used in combination with these 4 Intensive Gingiva powders and 3 Essence powders, depending on the desires of the patient.

An IPS e.max Ceram ZirLiner Gingiva is available for use in conjunction with zirconium oxide.

The Occlusal Dentin materials are available in two different shades. They are used as the shade basis for the occlusal surface and to intensify the chroma.

The Opal Effect materials are available in six shade gradations.

Starting with Opal Effect 1, with naturally enhanced opalescence and simultaneous high translucency, the brightness value between Opal Effect 2 and Opal Effect 4 is continuously increased.??

Opal Effect 5 then demonstrates the typical opal shade. The Opal Effect violet material is used to reduce the brightness value in the incisal area.

The five IPS e.max Ceram Shades in A-D and Chromascop shades are used for final shade modifications of IPS e.max restorations, as well as for the wash firing of IPS e.max glass ceramics.

The two IPS e.max Ceram Shades Incisal materials are especially suitable for fully anatomical restorations (e.g. IPS e.max ZirPress).

They are used to imitate the incisal area and they provide the incisal third with optical translucency and an in depth effect.

The IPS e.max Ceram Shade Guides demonstrate the translucency of the individual materials and are fired from the original ceramic materials.

The IPS e.max Ceram Shade Guides demonstrate the translucency of the individual materials and are fired from the original ceramic materials.

IPS e.max Ceram is recommended for use with IPS e.max materials to achieve the highest level of shading and characterization.

The Transparent materials are available in three shade graduations.

They are used to accurately reproduce transparent areas in full detail, particularly in the incisal third.

Depending on patient requirements, the Transparent materials may be used alone or mixed with other materials.

Ivoclar IPS e.max Press Ingots are high-quality lithium disilicate glass-ceramic ingots designed for the press technique. They are used to fabricate esthetic, durable restorations with excellent strength and translucency, making them ideal for both anterior and posterior cases.

Key Features:

• Material: Lithium disilicate glass-ceramic for high strength and esthetics

• Indications: Suitable for veneers, inlays, onlays, crowns, and implant-supported restorations

• Shades/Levels: Available in different translucency levels for customized results

• Processing: Designed for use with the press technique in compatible press furnaces

The IPS e.max Press Invex liquid is used to soften the surface reaction layer formed on pressed IPS e.max Press and ZirPress objects during the pressing procedure.

Ivoclar IPS e.max Press Ingots are high-quality lithium disilicate glass-ceramic ingots designed for the press technique. They are used to fabricate esthetic, durable restorations with excellent strength and translucency, making them ideal for both anterior and posterior cases.

Key Features:

• Material: Lithium disilicate glass-ceramic for high strength and esthetics

• Indications: Suitable for veneers, inlays, onlays, crowns, and implant-supported restorations

• Shades/Levels: Available in different translucency levels for customized results

• Processing: Designed for use with the press technique in compatible press furnaces

Shade tabs showing the range of ingots available in IPS e.max Press HO and MO.