Abrasives

58 products

  • Greenie HP KN7

    Greenie HP KN7

    Shofu

    Greenie HP KN7

    Use Greenies for a lustrous polish

    Features
    - Silicone polishers impregnated with high quality abrasives
    - Use Greenies for polishing
    - Use Greenie for: amalgams, precious alloys and non-precious alloys
  • DURA GREEN FINE HP STONES

    DURA GREEN FINE HP STONES

    Shofu

    DURA GREEN FINE HP STONES

    Dura-Green Stones are excellent for fast contouring and finishing. Dura-Green Fine Stones are ideal for surface characterization and adjusting details.

    Features
    - Impregnated with silicon carbide
    - Long lasting, fast cutting and always concentric in motion
    - Use Dura-Green Stones for: composites, amalgams, precious alloys, non-precious alloys and porcelains
    - Use Dura-Green Fine Stones for: composites and porcelains, see Unmounted Finishing Wheels section, for Dura-Green Wheels
  • FG BROWNIE MINI-PT

    FG BROWNIE MINI-PT

    Shofu

    FG BROWNIE MINI-PT

    Use Brownies to achieve a smooth surface

    Features
    - Silicone polishers impregnated with high quality abrasives
    - Use Brownies for pre-polishing
    - Use Brownie for: amalgams, precious alloys and non-precious alloys
  • CUTOFF DISKS

    CUTOFF DISKS

    Shofu

    CUTOFF DISKS

    Use Cut-Off Disks (resin-bonded) for: non-precious alloys and model castings
  • Ceramiste UL UM Wheel

    Ceramiste UL UM Wheel

    Shofu

    Ceramiste UL UM Wheel

    Ceramist is specifically made for polishing porcelains and enamel. Ceramist?? Soft is designed for contouring and polishing porcelain veneers, inlays and onlays in the laboratory.

    Features
    - Silicon carbide impregnated polishers
    - Three-step system
    - Use Ceramist Standard for pre-polishing. Ultra for polishing and Ultra II for super-polishing
    - Use Ceramist Soft PA and Ceramist?? Soft PB for smoothing rough surfaces and fragile porcalain margins
    - Use Ceramist for: porcelains and enamel
  • LAB WHITE STONES #1 72pk

    LAB WHITE STONES #1 72pk

    Shofu

    LAB WHITE STONES #1 72pk

    Dura-White Stones from Shofu are ideal for fine contouring and finishing of enamel, composites, compomers and porcelains.
    - Micrograined aluminum oxide grit
    - Vibration-free performance
    - Long lasting
  • LAB PINK STONES #5 72pk

    LAB PINK STONES #5 72pk

    Shofu

    LAB PINK STONES #5 72pk

    Lab Series Pink Stones are used for finishing of precious alloys.

    - Stainless steel shank
    - Efficient grinding performance
    - Good operating life
    - High edge stability
    - Pure aluminum oxide stones in coordinated grit size to suit different alloys
  • Abrasives Dresser

    Abrasives Dresser

    Shofu

    Abrasives Dresser

    This metal bar is used for easy cleaning or precise redesigning of abrasives and polishers. Diamond coated grit

  • Robot Point FG 6Pk

    Robot Point FG 6Pk

    Shofu

    Robot Point FG 6Pk

    Precision diamonds for cavity and crown stump preparation and minimally invasive therapy. Precisely dosed amounts of natural diamond particles are evenly distributed over a one-piece shank made of hardened stainless steel. The ideal relation of the protruding and embedded parts of the diamond particles ensures a long-lasting low vibration performance.

    Features
    - Exact, even distribution of natural diamond particles
    - Five grits: super coarse, coarse, standard, fine, superfine
    - Shank and working end are produced from a one-piece blank
    - Long-lasting
    - Precise concentricity
  • HP LAB PINK #5

    HP LAB PINK #5

    Shofu

    HP LAB PINK #5

    Lab series stones are made of pure aluminum oxide and are free from carbon contaminants. Use the White Lab Series Stones for finishing noble and predominantly base ceramic metals, Pink Lab Series are for high noble ceramic metals and Coral Lab Series are for chrome-nd nickel alloys.

    Features
    - Aluminum oxide grit free from carbon contaminants
    - Use Lab Series White and Pink for: precious alloys
    - Use Lab Series Coral for: non-precious alloys and model castings
  • HP CORAL STONES #6

    HP CORAL STONES #6

    Shofu

    HP CORAL STONES #6

    Lab series stones are made of pure aluminum oxide and are free from carbon contaminants. Use the White Lab Series Stones for finishing noble and predominantly base ceramic metals, Pink Lab Series are for high noble ceramic metals and Coral Lab Series are for chrome-nd nickel alloys.

    Features
    - Aluminum oxide grit free from carbon contaminants
    - Use Lab Series White and Pink for: precious alloys
    - Use Lab Series Coral for: non-precious alloys and model castings
  • HP MANDREL

    HP MANDREL

    Shofu

    HP MANDREL

    Secures all unmounted wheels for optimal control. Stainless steel. 12 pack

  • FG ROBOT POINT 1 PIECE (835-1)

    FG ROBOT POINT 1 PIECE (835-1)

    Shofu

    FG ROBOT POINT 1 PIECE (835-1)

    Precision diamonds for cavity and crown stump preparation and minimally invasive therapy. Precisely dosed amounts of natural diamond particles are evenly distributed over a one-piece shank made of hardened stainless steel. The ideal relation of the protruding and embedded parts of the diamond particles ensures a long-lasting low vibration performance.

    Features
    - Exact, even distribution of natural diamond particles
    - Five grits: super coarse, coarse, standard, fine, superfine
    - Shank and working end are produced from a one-piece blank
    - Long-lasting
    - Precise concentricity
  • FG ROBOT POINT 1 PIECE (820F-1)

    FG ROBOT POINT 1 PIECE (820F-1)

    Shofu

    FG ROBOT POINT 1 PIECE (820F-1)

    Precision diamonds for cavity and crown stump preparation and minimally invasive therapy. Precisely dosed amounts of natural diamond particles are evenly distributed over a one-piece shank made of hardened stainless steel. The ideal relation of the protruding and embedded parts of the diamond particles ensures a long-lasting low vibration performance.

    Features
    - Exact, even distribution of natural diamond particles
    - Five grits: super coarse, coarse, standard, fine, superfine
    - Shank and working end are produced from a one-piece blank
    - Long-lasting
    - Precise concentricity
  • Robot Point FG 1pc

    Robot Point FG 1pc

    Shofu

    Robot Point FG 1pc

    Precision diamonds for cavity and crown stump preparation and minimally invasive therapy. Precisely dosed amounts of natural diamond particles are evenly distributed over a one-piece shank made of hardened stainless steel. The ideal relation of the protruding and embedded parts of the diamond particles ensures a long-lasting low vibration performance.

    Features
    - Exact, even distribution of natural diamond particles
    - Five grits: super coarse, coarse, standard, fine, superfine
    - Shank and working end are produced from a one-piece blank
    - Long-lasting
    - Precise concentricity
  • Joe Dandy Disk - 7/8 D/C Cup

    Joe Dandy Disk - 7/8 D/C Cup

    Keystone

    Joe Dandy Disk - 7/8 D/C Cup

    These discs, made of silicon carbide, are especially suited for cutting and finishing porcelain and gold. Ideal speeds for the discs are between 10,000 and 12,000 rpm.
  • SEPERATING DISK RED FLASH

    SEPERATING DISK RED FLASH

    Keystone

    SEPERATING DISK RED FLASH

    Red Flash Disc

    The Red Flash Disc is the most popular and finest disc available from Keystone Industries. The cut-off wheel quality is strong, fast and free cutting on all chrome, precious and semi-precious alloys. Made of aluminum oxide, the disc can withstand up to 25,000 rpm.

    Features:
    Made of aluminum oxide
    Available size: 15/16 In x .025 In (23.8 x 0.63mm)
    Available in 100/Box
  • Veri Thin Disk

    Veri Thin Disk

    Keystone

    Veri Thin Disk

    These Veri-Thin Discs are much thinner than the regular Joe Dandy Discs, but still maintains the strength and fast, cool cutting qualities. These discs, made of silicon carbide, are especially suited for cutting and finishing porcelain and gold. Ideal speeds for the discs are between 10,000 and 12,000 rpm.


    Features:
    Made of silicon carbide
    Available Color: Light gray
    Available Sizes: 3/4 in x .015 in (19 x 0.38 mm), 7/8 in x .015 in (22.2 x 0.38 mm)
    Available in 50/Box
  • Dura Thin Disk - Box/25

    Dura Thin Disk - Box/25

    Keystone

    Dura Thin Disk - Box/25

    Dura-thin Discs

    These Dura-thin Discs are the ultimate, non-contaminating companion to the Ultra-thin Discs. Made of fine aluminum oxide abrasive, Dura-thin Discs are specially formulated for fine cutting and finishing of ceramic metals. Ideal speeds for the discs are between 10,000 and 12,000 rpm.

    Features:
    Made of aluminum oxide
    Available Color: Brown
    Size: 7/8 In x .010 In (22.2 x 0.25mm)
    Available in 25/Box
  • Ultra Thin Disk - Box/25

    Ultra Thin Disk - Box/25

    Keystone

    Ultra Thin Disk - Box/25

    Ultra-thin Disc

    Keystone Industries Ultra-thin Abrasive Discs have the exceptional combination of thinness, strength and cutting qualities, which have made them an indispensable industry standard. These abrasives are used for fine cutting and finishing on porcelain interproximals and margins. The pure fine silicon carbide abrasive is a unique formulation that will not discolor porcelain. Best used between 10,000 and 12,000 rpm.

    Features:
    • Made of silicon carbide
    • Available Color: Gray
    • Available Size: 7/8" x .009" (22.2 x 0.22mm)
    • Available in 25/box
  • Cut Off Wheels (100)

    Cut Off Wheels (100)

    Keystone

    Cut Off Wheels (100)

    These strong Cut-off Wheels are long lasting and fast cutting.

    The wheels can be used on chrome cobalt and other non-precious metals.

    Features:
    • Available sizes: 35 x 0.7mm, 25 x 0.7mm
    • Available in 100/Box
  • HEATLESS WHEELS 50/BOX SIZE REULAR

    HEATLESS WHEELS 50/BOX SIZE REULAR

    Keystone

    HEATLESS WHEELS 50/BOX SIZE REULAR

    Heatless Original Wheels (gray) are made of a silicone carbide abrasive to make a unique, non-loading binder for rapid reduction through the final shaping of non-precious, semi-precious, precious alloys, porcelain, acrylic, denture teeth and natural dentition, without generating excessive heat.

    These wheels come in 15 different sizes and in regular grit. 
    They also withstand a maximum of 20,000 rpm.

    The White Heatless Wheels are non-contaminating, aluminum oxide wheels that can be used on either porcelain or precious and semi-precious metal. They cut fast, run true, wear evenly, and won`t ever clog. They also come in 15 different sizes.

    Features:
    • Made of silicone carbide
    • White Heatless Wheels made of aluminum oxide
    • Available sizes: 15 different sizes
    • Available in 50/Pkg
  • MIZZY HEATLESS WHEELS WHITE

    MIZZY HEATLESS WHEELS WHITE

    Keystone

    MIZZY HEATLESS WHEELS WHITE

    Heatless Original Wheels are made of a silicone carbide abrasive to make a unique, non-loading binder for rapid reduction through the final shaping of non-precious, semi-precious, precious alloys, porcelain, acrylic, denture teeth and natural dentition, without generating excessive heat.

    These wheels come in 15 different sizes and in regular grit. 
    They also withstand a maximum of 20,000 rpm.

    The White Heatless Wheels are non-contaminating, aluminum oxide wheels that can be used on either porcelain or precious and semi-precious metal. They cut fast, run true, wear evenly, and won`t ever clog. They also come in 15 different sizes.

    Features:
    • Made of silicone carbide
    • White Heatless Wheels made of aluminum oxide
    • Available sizes: 15 different sizes
    • Available in 50/Pkg
  • 3/4"Coarse Arbor Bands, Pk1000

    3/4"Coarse Arbor Bands, Pk1000

    Buffalo

    3/4"Coarse Arbor Bands, Pk1000

    Arbor Bands 3/4"" Coarse Bx/100